Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables

Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables
Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables
Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables
Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables

Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables
Power supply AC / DC. Expert advice available via telephone. Plasma Cutter - 85 A - 400 V - Pilot Ignition. Cutting current: 20 - 85 A. Cutting thickness: 0 - 27 mm. Do you have a question? Plasma Cutter - 85 A - 400 V - Pilot Ignition #2044. Electrodes for Plasma: 6 Pcs. Ceramic Coping for Plasma: 1 Pcs. Nozzles and electrodes for Plasma. High voltage plug not included! The plasma cutter S-PLASMA 85H by Stamos Germany is a robust and highly reliable machine. It works with an input voltage of 400 V.

Measuring 55 x 37 x 21 cm, it is manufactured using lightweight, sturdy materials, weighing only 20.1 kg. The Stamos S-PLASMA 85H offers cutting current settings between 20 and 85 A, providing great flexibility for all kinds of conditions. Order today to secure your competitively priced Stamos Selection S-Plasma 85H.

Please note: The device is delivered without high voltage power cable! Easy cutting of many materials. 1,2 mm thick, 27 mm deep cutting. Turn-on duration ED at max.

5.5 bar, 175 l/min. 55 x 37 x 21 cm. 65 x 45 x 37 cm. Technical drawings in English - download PDF. IGBT = insulated-gate bipolar transistor.

IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor.

The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection. On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

This device works with a 3-phase connection (400 V +/- 10 %). The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation. Start the weld by placing pressure on the torch button.

Stop the process by releasing the button. By pressing the torch button the solenoid valve opens.

Allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again. The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

Shows the welding / cutting parameters. The LED light indicates overheating or a malfunction. Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure. A pilot arc is ignited by pressing the torch´s trigger. Thus, grates can be cut. Plasma hose package: 4 m. 1 ceramic cap for plasma. Nozzles and electrodes for plasma. The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices.

No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range. We are proud to use exclusively the best materials in our machines.

Go for the brand products by the Stamos Welding Group and weld like professionals! The STAMOS Welding Group exhibits at major events within the welding industry. During the international welding trade fair ExpoWelding, the Stamos received an award for its spectacular presentation. ExpoWelding takes place every two years in Sosnowiec, Poland. This is one of the most important events in the welding industry regarding Central and Eastern Europe. At this years ExpoWelding , over 170 companies from Poland, Gerrnany, Czech Republic, Netherlands, Finland, Sweden, Canada, Taiwan, Spain, Italy and Turkey participated. The Stamos Welding Group Stand was incredibly popular, with a large number of welding experts visiting the stand. This lead to many interesting and constructive conversations. The standout product on the stand, attracting the most attention from visitors, was the MIG/MAG welding device Omega 500. Our German research and development centre at STAMOS Germany designed the innovative technology within the Omega 500, focusing on the usability of the labour-intensive and demanding applications that are required in industry and production. As the device was freely accessible to all visitors, they could experience it on their own. Our visitors were impressed with the quality of the welds and praised the high operating comfort of the WELBACH Omega 500 welding device. For more information on the successful performance of the STAMOS Welding Group, take a look at our photo report below. STAMOS WELDING GROUP DESIGNED IN GERMANY, PRODUCED IN CHINA BY GERMAN QUALITY STANDARDS.

Our devices are thought out and designed in Germany. Production is outsourced to China due to obvious cost factors.

WHAT MAKES US DIFFERENT FROM THE OTHERS? The production in China is subject to German quality controls at every step of the process.

The STAMOS WELDING GROUP has multiple production facilities in China. Here the facilities are matched with the quality requirements of the product lines in question. STAMOS GERMANY The red series is mainly meant for price-conscious customers. Good quality at reasonable prices.

Whoever wants to weld regularly and with higher currents should choose a device from the advanced Stamos series. STAMOS GERMANY PRO SERIES The devices are equipped with 8 m long cables. Moreover the components are of higher quality, more powerful and possess a longer life span than those of the standard Stamos versions. They are especially suited for customers that weld a lot and need a large distance to the welder. The recyclability and energy efficiency is higher than for other devices. Use of: paints, glues, cables and plastics with less pollutants. Tightened production controls to ensure sustainability and strongly reduce the environmental impact. The use of energy efficient components ensures minimal losses of energy.

STAMOS GERMANY SELECTION The â?? STAMOS SELECTION stands for excellent quality, perfect welding seams and cuts as well as highest design requirements.

These devices are characterised by great design (first products in this price class that ensure excellent composition of special metals and plastics). The use of high class steering elements and connections and the special selection of first class components e. Toshiba guarantee higher reliability and professional use. Every material used as well as every step of production is checked various times for 100% quality and the end products are repeatedly tested for aspects like processing, performance and stability. STAMOS POWER This is a further development from our Stamos series so far.

The devices have higher qualities than their predecessors and are distinguished by enhanced performance. Use of higher quality and more robust connections and cables, especially resilient MOSFET transistors and other components.

Construction by highly professional SMT machines (fully automatic machines, which use the surface mount technology, meaning the individual components are mounted exactly to the circuit boards with the help of lasers) for the assembly of different components and especially for the production of the circuit boards that ensure constant and reliable performance. WELBACH WWe further continue our innovation techniques and present our digital welders by WELBACH. The devices are fully digitally controlled with the help of the Stamos machine interface. The high class operation panels ensure highest comfort.

The digital signal processors monitor all parameters so that the conducted work always matches the set parameters. The plasma cutters by Welbach are additionally equipped with original TRAFIMET® plasma torches. The item "PLASMA CUTTER 85 A PLASMA CUTTING MACHINE PILOT IGNITION 400 V NOZZLES + CABLES" is in sale since Monday, May 2, 2016. This item is in the category "Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Welders, Cutters & Torches\Plasma Cutters".international" and is located in Berlin.

This item can be shipped to all countries in Europe.


Plasma Cutter 85 A Plasma Cutting Machine Pilot Ignition 400 V Nozzles + Cables


Home  Sitemap  Contact Us  Privacy Policy  Service Agreement