Use keys and digital knobs to adjust and operate parameters, easy to use. Its panel adopts a 60-degree inclined plane installation method, which is suitable for portable CNC cutting machine operation. Built-in voltage divider and shielded by metal at all angles, the overall volume is smaller and the anti-interference ability is better.Built-in simple parameter setting, you can flexibly change the operating parameters to adapt to various complex working conditions. It can adapt to external working conditions by changing the parameters, without any adjustment to the internal hardware of the device.
The effective level of input signal can be set. The input signal is valid when the default is low level. It can be changed to be valid when there is high level. The input and output are all isolated by optocoupler, which effectively protects it from overvoltage and interference electromagnetic pulse damage.Arc starting relay and the arc starting success relay use power relays for Omron, which work reliably. During various work processes, the real-time level of input signal can be viewed. Different work processes are locked to each other to ensure no misoperation. When the height controller has a perforation delay, the dynamic perforation function can be used during arc starting. In the cutting process, real-time monitoring of whether the arc is actually started, if the arc is broken in the middle, the height controller will promptly notify CNC system and turn off the arc relay to avoid long-time arc starting in the air when the arc is broken.
In the process of automatic height adjustment, ensure that the actual arc voltage always closely follows the set arc voltage, and there is basically no static difference. During automatic height adjustment process, arc voltage setting value can still be changed, so that cutting torch height can be fine-tuned in real time during the cutting process. In the process of automatic height adjustment, collision signal can be fed back to the CNC system to avoid the collision and the CNC system still moves forward.
In the process of automatic height adjustment, the arc voltage intelligent adjustment function can be used. After the cutting is completed, the height controller automatically lifts the cutting torch, and the lift height can be set arbitrarily. Technical Parameters: - Working voltage: rated DC 24V (power supply range 20V-30V) - Lifting motor: DC24V DC motor - Drive mode: PWM (pulse width modulation mode) continuous speed regulation - Output current: 0A-2A (the maximum output current of the motor port is 2A) - Output power: 50W max. - Initial positioning: proximity switch initial positioning, protective cap contact initial positioning - Partial pressure ratio: 100:1/50:1 - Arc voltage sampling accuracy: 0.1V - Arc voltage adjustment accuracy: 1V - Cutting torch lifting speed: depends on the highest speed of the lifting mechanism - Arc voltage setting range: 30V600V, which can be changed in real time via the panel knob - Maximum cutting tracking speed: depending on the highest speed of the lifting mechanism - Overload protection: automatic overload, overheating, undervoltage protection, power supply reverse connection protection.Package Included: - 1 x Set of Plasma Torch Height Controller. Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days. The item "F1621 THC Plasma Torch Height Controller Digital Tube For Plasma Cutting Machine" is in sale since Thursday, October 15, 2020.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "pincei" and is located in Shenzhen.
This item can be shipped worldwide.