Expert customer service in 9 languages. Plasma Cutter - 70 A - 400 V. Cutting current: 10 - 70 A. Do you have a question? The plasma cutter is suitable for steel and other such steel alloys, stainless steel, cast iron, copper, nickel and aluminium.
Thanks to its versatility, it enriches each and every workshop, as well as the garage of every hobby craftsman. The S-CUTTER 70.1 is suitable for the precision cutting of a variety of metals and has a high cutting speed whereas the material waste remains low. Thanks to the smooth, adjustable cut max.
20 mm, no burn traces will be created even with thin metals. In addition, the plasma cutter is lightweight, making it easy to hold... In addition, the plasma cutter is lightweight, making it easy to hold, therefore very mobile. The S-CUTTER 70.1 plasma cutter can always be adapted specifically to the requirements of the user thanks to knobs for the variable setting of the current i and the air pressure.
The button for pressure regulation can be determined so that the pressure cannot be inadvertently altered during work. In addition, the device has the button "Gas / Work", which can be actuated to test the gas flow. The plasma cutter is equipped with the modern V-Mosfet inverter technology, which ensures that the current is used optimally and damage caused by overflow can be prevented. In addition, thanks to the 2T / 4T switch, the user can decide whether the plasma cutter operates only while the button is pressed or continuously. This makes the device equally suitable for short and lengthy working periods.
Users of the S-CUTTER 70.1 can always keep an eye on the functions of the machine thanks to the LED display and the manometer. In addition, the unit has powerful ventilation and overload protection. This means that the plasma cutter can always be optimally controlled by the user and longevity is guaranteed.
In addition to the plasma cutter, you will receive the power cable, the P-60 plasma torch, a gas hose, a ground cable with clamp and various consumables are also supplied. The device is supplied without a power plug. Cutting current at 100% DC. Cutting current at 60% DC. 3,5 - 4 bar.
51,00 x 19,50 x 38,00 cm. 64 x 30 x 49 cm. The welder is equipped with a MOSFET transistor.This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld. Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface.
Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection. On the back of every welding machine is a screw with an earthing mark.
Before use, earth the unit via a cross-section cable, which must be at least 6 mm². This device works with a 3-phase connection (400 V +/- 10 %).
The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation. Start the weld by placing pressure on the torch button. Stop the process by releasing the button. By pressing the torch button the solenoid valve opens.
Allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again. The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.Choose between the 2T and 4T mode. Shows the welding / cutting parameters. Shows the value of compressed air the compressor delivers to the plasma cutter.
The plasma cutter has a pressure reducing valve which regulates the air pressure. A pilot arc is ignited by pressing the torch´s trigger.Thus, grates can be cut. Plasma cutter S-CUTTER 70.1. Plasma torch 4,85 m. Ground cable with clamp - 3 m. Plasma electrode - 1 pc.
Shield cup - 1 pc. Clamping ring - 2 pcs. Power cable without power plug.The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices. No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range.
We are proud to use exclusively the best materials in our machines. Go for the brand products by the Stamos Welding Group and weld like professionals! This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters".kingdom" and is located in this country: DE.
This item can be shipped to United Kingdom.