Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm

Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm

Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm

Expert customer service in 9 languages. Plasma Cutter - 100 A - 400 V - 40 mm. 100 A / 400 V. Outstanding performance-100 A at 60% DC, 77 A at 100%.

Proven-contactless ignition by means of high frequency. Powerful-depending on the metal cutting depths up to 40 mm. Control-clear control panel with LCD display. Do you have a question? High-performance plasma cutter with 5 m hose package.

The S-CUTTER 100C plasma cutter by Stamos Power. S-CUTTER 100C-sophisticated welding technology combined with a high cutting performance.

With a cutting depth for carbon steel of up to 40 mm, the plasma cutter is just as equipped for demanding tasks in repair and renovation as it is for efficient use in production or the workshop. The high performance is made possible by the particularly reliable IGBT inverter technology.

You can select the external compressor according to your requirements and circumstances and set the air pressure for plasma cutting via the external pressure reducer. This proves the unit to be very flexible and easy to transport. At a switch-on time of 60%, the cutting current is 100 A. With a working range between 30 and 100 A, the Stamos Power.

The plasma cutter by Stamos Power. The power unit of the plasma cutting device is protected against damage by fan cooling and overheating protection. The cutting torch is cooled by the compressed air. The powder-coated steel casing reliably protects the technology in the device, a handle facilitates the transport of the plasma cutter. Cutting current at 100 % DC.

Cutting current at 60 % DC. 65.00 x 40.00 x 58.00 cm. 75.00 x 50.00 x 68.00 cm. IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode.

This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

Powerful fans ensure an optimal removal of heat from the unit. For plasma cutting, a gas is required with which the molten metal is blown away from the work surface.

Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection. On the back of every welding machine is a screw with an earthing mark.

Before use, earth the unit via a cross-section cable, which must be at least 6 mm². This device works with a 3-phase connection (400 V +/- 10 %). A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation. Start the weld by placing pressure on the torch button. Stop the process by releasing the button. By pressing the torch button the solenoid valve opens.

Allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current.

The welding process stops once you press the burner button again. The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

Shows the welding / cutting parameters. The LED light indicates overheating or a malfunction. The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices.

No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range. We are proud to use exclusively the best materials in our machines. Go for the brand products by the Stamos Welding Group and weld like professionals!

This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters".kingdom" and is located in this country: DE. This item can be shipped to United Kingdom.
Plasma Cutting Machine Plasma Cutter 100 A 60% Duty Cycle Metal Cutting 40 mm


Home  Sitemap  Contact Us  Privacy Policy  Service Agreement